Новини - литература и периодика

[Клуб Стендов Моделизъм България]

New FSM video, model kit reviews, and more! from FineScale Modeler Newsletter (Wed, 22 Jul 2026 12:29:07 -0500 (CDT))

7/22/2026




 ☰✕Show Galleries|Kit Reviews|How-To|Magazine 

 Check out our brand new FSM Weekly!

FineScale Modeler opens AMT and Italeri kits, talks kits from vendors, and shows exclusive WonderFest footage
In this FSM Weekly, the FineScale Modeler staff looks inside new kits and products from AMT, Italeri, Helion, and ICM, discusses scoping out and buying kits from vendors at shows and contests, and wraps up the episode with exclusive footage from WonderFest 2026!Watch it here!
After you watch our new FSM Weekly, check out our kit reviews! NEW kit reviews

ICM 1/72 scale M3 Bradley plastic model kit review
Don't miss any of our exclusive Workbench Reviews, including this review of the ICM 1/72 scale M3 Bradley. It's an easy kit to get you into armor modeling or for you to take it to the next level.Check it out!
And while you're there, read:
• Tamiya 1/48 scale Leopard 2A7V German main battle tank plastic model kit review
If you didn't get your model fix, there's a new show gallery just for you! 
Brought to You By: Dry-Dock Models & Parts

JoyYard Hobby Kits USS Missouri Montana - Wisconsin
Shop nowShop now NNL Milwaukee 33 scale model car show photo gallery

Kitbashing and dirt were on the menu this year, with plenty more besides
On Saturday, May 2, 2026, the Auto Modelers Group hosted NNL Milwaukee at the Root River Center in Franklin, Wisconsin. One of two preeminent Midwest NNLs, it attracted modelers from as far away as New York and California. With 463 models on the tables, turnout was good across all categories. FineScale Modeler was on hand to shoot some of the standout models, and there were plenty to choose from!Take a look!
If this didn't answer your modeling questions, our forum may just have the answer. What’s new and popular on the FSM Forum

Posts from modelers like you cover all sorts of modeling subjects
Join the most recent and popular conversations on the FSM Forum. There's plenty to talk about, including:
• [Gallery] Albatros D.V (paper model scale 1:50)
• Decals over decals question
• MPC “Spirit of ‘57” Chevy Gasser-Car #1 Completed 07/14Click to explore
There’s plenty to learn from our forum, and the latest FSM issue, too! 

 Get the Current Issue of FSM!

In the July/August 2026 Issue
FineScale Modeler is packed with expert techniques, kit reviews, and inspiring model galleries.Rafał Lebioda builds a fantastic model from a simple kitRepair lacquer even after spraying the clear coatGrant Dalzell upgrades a Revell EasyKit with a base, 3D-printed parts, and weatheringResearch uncovers possibilities for an unusual Tiger IJohn C. Backenstross uses fundamental techniques improve a World War II bomber
Plus:Plastic Undercover and Mad City Modelers Annual Show galleriesOne Great ModelWorkbench Reviews of the Tamiya F-14D Tomcat, Italeri Lancia Fulvia, Tamiya PaK 38
And more!Get the issue 

 Recommended for You

Shop Now

Shop Now

Shop Now  NEED ASSISTANCE?CONTACT USVISIT OUR WEBSITELIKE US ON FACEBOOKGIVE A GIFT


 |Preferences|Customer Service|Privacy Policy|View In Browser
This message was sent to .

©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402

[Клуб Стендов Моделизъм България]

Clear the Tracks — Summer Clearance Sale Is Here from FineScale Products (Sun, 2 Aug 2026 12:52:27 -0500 (CDT))

Huge Savings

BOOKS  ❘  TOOLS  ❘  GIFTS  ❘  DOWNLOADS  ❘  SALE


Over 200 items on sale - check them out now.SHOP NOW

Save Now

Save Now

Save Now

Save Now

Save Now

Save Now

Save Now

Save Now

Save Now










Get to know the Trains.com family! Explore all the best in modeling how-to, railroad news and history. Learn more today...











 
While supplies last. Sales tax and retail delivery fee where applicable.
 •  Preferences  •  Customer Service  •  Privacy Policy  •  View Online
This message was sent to .


©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402
AS1644

[Клуб Стендов Моделизъм България]

New model kit reviews, show gallery, and more! from FineScale Modeler Newsletter (Wed, 12 Aug 2026 11:00:31 -0500 (CDT))

8/12/2026




 ☰✕Show Galleries|Kit Reviews|How-To|Magazine New model kit reviews

Academy 1/35 scale Panzer III Ausf N Afrika Korps plastic model kit review
Don't miss any of our exclusive Workbench Reviews, including this review of the Academy 1/35 scale Panzer III Ausf N Afrika Korps. It's another good entry into Academy's Panzer III lineup for an experienced builder.Read more reviews
And while you are there, check out:The Arma Hobby 1/72 scale Curtiss P-36C Hawk review
After getting your kit review fix, feel the magic of WonderFest, up next! 
Brought to You By: Model Rectifier Corporation

The legendary LAHATUT - Israel's anti-tank helicopter
● Familiar unique aerodynamic fuselage ● Five bladed rotor design ● Four TOW anti-tank missile launchers ● Detailed exhaust outlets and main rotor hub ● Photo-etched parts and masking seals included ● Three marking optionsLearn more WonderFest Hobby Expo scale model show gallery

Fantastical figures and vehicles straight from the silver screen dominate this Kentucky show
Film and video game enthusiasts gathered with their models in Louisville, Kentucky, on May 30-31, 2026, for the 36th annual WonderFest Hobby Expo. This year, it celebrated the 60th Anniversary of Star Trek, held seminars, reproduced the original ILM model shop in Anaheim, presented sci-fi and fantasy movie and TV personalities, and, of course, hosted the model contest. FineScale Modeler set up in the contest room for the event and captured plenty of photos!Take a look!
This star-studded show featured lots of amazing models, and so does the FSM Forum. 
Brought to You By: Albion Alloys

Precision Metals for Model Makers
Albion Alloys Precision Metals are designed to help you achieve fantastic detail on your scale model. Our slide fit tube starts from 0.3 mm ( 14 thou ) and goes up in 0.1 mm increments. It's easy to cut, glue, solder and shape – please visit our blog page to see some amazing examples and maybe gain some inspiration for your next build.Learn More What’s new and popular on the FSM Forum

Posts from modelers like you cover all sorts of modeling subjects
Join the most recent and popular conversations on the FSM Forum. There's plenty to talk about, including:
• 1966 Aurora Wanderer Whaler
• Tru-Color Paint
• 1/32 U-2S one year in the makingClick to explore
There’s plenty to learn from our forum, and the latest FSM issue, too! 

 Get the Current Issue of FSM!

In the September/October 2026 issue of FSM
FineScale Modeler is packed with expert techniques, kit reviews, and inspiring model galleries. This issue includes:Ricardo Dacoba used 3D-printed parts and careful painting improve an A-10C Thunderbolt IIBuilding models as a kid started a journey to the starsAndrew Cooper scratch-bashes the single Australian SAS "Mothership"Tips and techniques for building models with transparent bodies
Plus:HeritageCon and AMPS 2026 show galleriesOne Great ModelWorkbench Reviews of the Tamiya M24 Chaffee, Tamiya Zakspeed Turbo Capri, MPC V.I.N.CENT
And more!Get the issue 

 Recommended for You

Shop Now

Shop Now

Shop Now  NEED ASSISTANCE?CONTACT USVISIT OUR WEBSITELIKE US ON FACEBOOKGIVE A GIFT


 |Preferences|Customer Service|Privacy Policy|View In Browser
This message was sent to .

©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402

[Клуб Стендов Моделизъм България]

Great Layouts Start With the Right Tools — Shop Now from FineScale Products (Wed, 19 Aug 2026 11:20:44 -0500 (CDT))

Trains.com Store Top Tools

BOOKS | TOOLS | MAGAZINES | DOWNLOADS | NEW

SHOP NOW

Shop Now

Shop Now

Shop Now

Shop Now

Shop Now

Shop Now

Shop Now

Shop Now

Shop Now







Sales tax and retail delivery fee where applicable.
• Preferences • Customer Service • Privacy Policy • View Online
This message was sent to .

©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402 AS0944

[Клуб Стендов Моделизъм България]

New model kit reviews, show gallery, and more! from FineScale Modeler Newsletter (Wed, 26 Aug 2026 09:13:17 -0500 (CDT))

8/26/2026




 ☰✕Show Galleries|Kit Reviews|How-To|Magazine Check out our BRAND NEW FSM Weekly!

FineScale Modeler opens kits from Tamiya and AMT, minimizes hand tremor, and shows exclusive IPMS USA Nats footage
In this FSM Weekly, the FineScale Modeler staff looks inside new kits and products from Tamiya, AMT, and Roden, finds ways to minimize hand tremors at the workbench, and wraps up the episode by showing exclusive footage from the IPMS/USA National Convention!Watch it here!
This FSMW had some awesome kits, helpful tips, and even show footage! See more kits in our reviews, up next. 
Brought to You By: SonicMax Inc.

SonicMax Slice 10 Surpasses $100,000 on Kickstarter
SonicMax Slice 10 has surpassed $100,000 on Kickstarter with 740+ backers. Designed to tackle heat buildup in cordless ultrasonic cutting, Slice 10 combines a high-efficiency ultrasonic system, active cooling, and a replaceable 5,000mAh battery for longer, more consistent cutting sessions. Early Bird rewards start at $119.Learn more New kit review

ICM 1/48 scale HP.52 Hampden B.Mk.I plastic model kit review
Don't miss any of our exclusive Workbench Reviews, including this review of the ICM 1/48 scale HP.52 Hampden B.Mk.I. It's a kit of an unusual subject that has plenty of parts to keep you busy.Check it out!
And while you're there, read:
• ResKit 1/32 scale F-35A "Lightning II" Late Cockpit 3D-printed resin model set
These kits make high-class models, and so did the builders at Nimcon, so scroll to see more. 
Brought to You By: Model Rectifier Corporation

Celebrate 80 Years of Vespa with Italeri's Iconic PX 125/150 Model in 1:9 scale
Introduced by Piaggio in the late 1970s, the Vespa PX became a legendary symbol of Italian motorcycling. Known for its metal body, distinctive design, and handlebar-mounted manual gear shift, it was ideal for city commuting and short leisure trips. With over 3 million units produced, it remains the best-selling Vespa ever and an enduring 1980s cultural icon of film, music, fashion, and "Made in Italy" style.Learn more NimCon 14 model contest photo gallery

This Northern Illinois show boasts figures, autos, aircraft, and more
The IPMS Lakes Region Scale Modelers hosted the NimCon 14 model contest at the VFW Post in McHenry, Illinois, on June 13, 2026. Aircraft, cars, ships, figures, and even a locomotive made their way to the contest tables this year. The theme focused on detail, rewarding builds that included scratchbuilding, lighting, modifications, and more. FineScale Modeler was there to take it all in and picked a selection of excellent scale models to share with you!Take a look!
We hope this show gallery satisfied, now see what the buzz is on our forum. 

 What’s new and popular on the FSM Forum

Don't miss any exciting Forum threads
Join the most recent and popular conversations on the FSM Forum. There's plenty to talk about, including:
• Finished: Border model 1:35 Nakajima B5N "Kate"
• Seeking advice on nursing home modeling
• Where do you buy your reference material from?Click to explore
There’s plenty to learn from our forum, and the latest FSM issue, too! 

 Get the latest issue of FSM!

In the September/October 2026 issue of FSM
FineScale Modeler is packed with expert techniques, kit reviews, and inspiring model galleries. This issue includes:Careful painting and 3D-printed parts help Ricardo Dacoba build a spectacular A-10 Thunderbolt IIBill Krause, the designer of the Star Trek USS Enterprise-G, shows you his personal star fleetAndrew Cooper has no alternative but to scratchbash a model of the single SAS "Mothership"Tips and techniques for building models with transparent bodies
Plus:HeritageCon and AMPS 2026 show galleriesOne Great Model - An M3 Stuart stripped down for field repairsWorkbench Reviews of the Tamiya M24 Chaffee, Tamiya Zakspeed Turbo Capri, MPC V.I.N.CENT, and more!
And more!Get the issue Recommended for You

Shop Now

Shop Now

Shop Now  NEED ASSISTANCE?CONTACT USVISIT OUR WEBSITELIKE US ON FACEBOOKGIVE A GIFT


 |Preferences|Customer Service|Privacy Policy|View In Browser
This message was sent to .

©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402

[Клуб Стендов Моделизъм България]

Discover the Year's Best Builds from FineScale Products (Thu, 27 Aug 2026 13:00:50 -0500 (CDT))

All-New: Contest Cars 2026

BOOKS  ❘  TOOLS  ❘  MAGAZINES  ❘  DOWNLOADS  ❘  SALE

ORDER YOUR COPY
FineScale Modeler proudly presents Contest Cars 2026! This 100-page special publication is packed with scale-auto show and contest coverage from NNL North, ACME Southern Nationals, the IPMS/USA National Convention, and more.
Explore 400+ awe-inspiring models – muscle cars, custom cars, lowriders, trucks, exotics, and more – from the hobby’s top modelers including detailed photos and comprehensive captions.
BONUS: Check out this all-new how-to section featuring articles written by multi-award winning and master scale modelers Tim Boyd and Mark Jones. These exclusive modeling and painting tips and tricks will help you make your models contest worthy.

ORDER YOUR COPY










Get to know the Trains.com family! Explore all the best in modeling how-to, railroad news and history. Learn more today...











 
Sales tax and retail delivery fee where applicable. Preliminary cover shown; final cover subject to

[Клуб Стендов Моделизъм България]

FineScale Modeler Special Issue Sale — Shop and Save Now from FineScale Products (Tue, 1 Sep 2026 11:58:08 -0500 (CDT))

Trains.com Store BIG Savings on Special Issues!

BOOKS | TOOLS | MAGAZINES | DOWNLOADS | NEW


with code:
SIP50
Now for a limited time save 50% off select special magazine issues from the editors of FineScale Modeler! Delve into your favorite hobby with these high-quality bonus issues which provide a deep look into popular topics. SHOP ALL







Offer expires 9/13/26 at 11:59pm CT. Excludes Contest Cars 2026. Sales tax and retail delivery fee where applicable.
• Preferences • Customer Service • Privacy Policy • View Online
This message was sent to .

©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402 AS0940

[Клуб Стендов Моделизъм България]

Ditch the Hobby Knife: Slice 10 Hits Kickstarter from FineScale Modeler (Wed, 2 Sep 2026 12:58:18 -0500 (CDT))

A special promotional message from one of our valued advertisers.Low heat, clean cuts, long runtime! Now 25x funded on Kickstarter




New on Kickstarter: A Cordless Ultrasonic Cutter That Doesn't Quit Mid-Sprue
If you still clean resin pour blocks and styrene sprues with a regular hobby knife, the work is familiar: more pressure, more tearing, and an edge that usually needs a second pass. An ultrasonic cutter changes that equation. The blade vibrates about 40,000 times per second at a microscopic amplitude, so it meets less resistance and can slice instead of crush.

The SonicMax Slice 10 is the next step in that idea: a wireless ultrasonic cutter designed around the limits that usually show up first: rough cuts, rising heat, and a tool that fades before the sprue is finished. Its high-efficiency transducer (Q > 500, more than double the 150–250 range typical of similar tools) puts more energy into the blade and less into wasted heat. Adaptive output control then reads material feedback and adjusts power and frequency, helping the cut stay smooth and even as you move from a thick block into a fine gate. You feel it as less drag, a flatter edge, and more control on small model parts.

That same efficiency, plus active cooling and a replaceable 5000 mAh 21700 battery, also keeps the session going. In an internal maximum-pressure stress test, Slice 10 delivered roughly 70 minutes of continuous high-load cutting before thermal protection was engaged, compared with about 20 minutes on a comparison unit.Learn More


Slice 10 is built for the work that usually turns into extra cleanup: resin and PLA/PETG/ABS parts, styrene sheet, foam board, leather, and soft PVC. The 40 kHz ultrasonic blade cuts with less pushing force, so the edge stays cleaner and flatter through a real session, not just a short test pass.

It runs on a swappable 5000 mAh 21700 battery, and Lift-to-Activate Auto Sensing wakes the tool when you pick it up off the bench, then powers it down when you set it flat. Less drag while you cut, less fuss when you stop.

Slice 10 is SonicMax’s first product. The Kickstarter campaign has already raised $125,000+ from 900+ backers, more than 25 times its $5,000 goal, with Early Bird pricing from $119.

See full specs and pricing on Kickstarter
is receiving this message because of their customer relationship with FineScale Modeler.

| View in Browser


©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402

Disclaimer: The opinions expressed here are those of the sponsors and are not an endorsement
nor do they reflect the opinions of Firecrown or any of its publications.

[Клуб Стендов Моделизъм България]

Last Chance — FineScale Modeler Special Issue Sale Ends Soon from FineScale Products (Tue, 8 Sep 2026 09:59:51 -0500 (CDT))

Trains.com Store BIG Savings on Special Issues!

BOOKS | TOOLS | MAGAZINES | DOWNLOADS | NEW


with code:
SIP50
Now for a limited time save 50% off select special magazine issues from the editors of FineScale Modeler! Delve into your favorite hobby with these high-quality bonus issues which provide a deep look into popular topics. SHOP ALL







Offer expires 9/13/26 at 11:59pm CT. Excludes Contest Cars 2026. Sales tax and retail delivery fee where applicable.
• Preferences • Customer Service • Privacy Policy • View Online
This message was sent to .

©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402 AS0940

[Клуб Стендов Моделизъм България]

New model kit reviews, show gallery, and more! from FineScale Modeler Newsletter (Wed, 9 Sep 2026 10:16:29 -0500 (CDT))

9/9/2026




 ☰✕Show Galleries|Kit Reviews|How-To|Magazine 


Brought to You By: MRC New kit reviews

Arma Hobby 1/72 scale Messerschmitt Me 262A-1a plastic model kit review
Don't miss any of our exclusive Workbench Reviews, including this review of the Arma Hobby 1/72 scale Messerschmitt Me 262A-1a. If you want a small-scale 262, you can't go wrong with this kit.Read more
And while you're there, check out:
• Rolltex Mini Series Terrain Pathways texture rollers review
After reading these reviews, roll on over to our Stark Scale Model show gallery. 
Brought to You By: The Midwest Model Shop

Your Source for 3D Printed Ship Parts
Use code FSM26 for 10% offLearn More Stark Scale Model Show

Say cheese! Car modelers gather in the spring for this seminal contest
On April 18, 2026, the Stark Scale Modelers Club held its 13th annual scale model car show at Tuslaw High School in Massillon, Ohio. A judged contest, first, second, and third place in each category were decided, along with People’s Choice selections. Don’t miss the wide range of auto models on offer this year, including junior entries and some extremely cool kitbashed replicas!Take a look!
If you have modeling stories, builds, or questions, share them on the FSM Forum. 
Brought to You By: Albion Alloys

Precision Metals for Model Makers
Albion Alloys Precision Metals are designed to help you achieve fantastic detail on your scale model. Our slide fit tube starts from 0.3 mm ( 14 thou ) and goes up in 0.1 mm increments. It’s easy to cut, glue, solder and shape – please visit our blog page to see some amazing examples and maybe gain some inspiration for your next build.Learn More What’s new and popular on the FSM Forum

Don't miss any exciting Forum threads
Join the most recent and popular conversations on the FSM Forum. There's plenty to talk about, including:
• Full custom slammed Pete
• 3D figures needed
• Emil à la suisseClick to explore
There’s plenty to learn from our forum, and the latest FSM issue, too! 

 Get the Current Issue of FSM!

In the September/October 2026 issue of FSM
FineScale Modeler is packed with expert techniques, kit reviews, and inspiring model galleries. This issue includes:Careful painting and 3D-printed parts help Ricardo Dacoba build a spectacular A-10 Thunderbolt IIBill Krause, the designer of the Star Trek USS Enterprise-G, shows you his personal star fleetAndrew Cooper has no alternative but to scratchbash a model of the single SAS "Mothership"Tips and techniques for building models with transparent bodies
Plus:HeritageCon and AMPS 2026 show galleriesOne Great Model - An M3 Stuart stripped down for field repairsWorkbench Reviews of the Tamiya M24 Chaffee, Tamiya Zakspeed Turbo Capri, MPC V.I.N.CENT, and more!
And more!Get the issue 

 Recommended for You

Shop Now

Shop Now

Shop Now  NEED ASSISTANCE?CONTACT USVISIT OUR WEBSITELIKE US ON FACEBOOKGIVE A GIFT


 |Preferences|Customer Service|Privacy Policy|View In Browser
This message was sent to .

©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402

[Клуб Стендов Моделизъм България]

Don't Miss the Year's Best Builds from FineScale Products (Sun, 13 Sep 2026 09:55:48 -0500 (CDT))

All-New: Contest Cars 2026

BOOKS  ❘  TOOLS  ❘  MAGAZINES  ❘  DOWNLOADS  ❘  SALE

ORDER YOUR COPY
FineScale Modeler proudly presents Contest Cars 2026! This 100-page special publication is packed with scale-auto show and contest coverage from NNL North, ACME Southern Nationals, the IPMS/USA National Convention, and more.
Explore 400+ awe-inspiring models – muscle cars, custom cars, lowriders, trucks, exotics, and more – from the hobby’s top modelers including detailed photos and comprehensive captions.
BONUS: Check out this all-new how-to section featuring articles written by multi-award winning and master scale modelers Tim Boyd and Mark Jones. These exclusive modeling and painting tips and tricks will help you make your models contest worthy.

ORDER YOUR COPY










Get to know the Trains.com family! Explore all the best in modeling how-to, railroad news and history. Learn more today...











 
Sales tax and retail delivery fee where applicable. Preliminary cover shown; final cover subject to

[Клуб Стендов Моделизъм България]

Peek inside FineScale Modeler's new issue! from FineScale Modeler (Fri, 18 Sep 2026 08:59:14 -0500 (CDT))

All New Issue of FineScale Modeler Magazine…





IN THE NOVEMBER/DECEMBER ISSUE
As 2026 comes to a close, the November/December FineScale Modeler issue helps you take those first steps to custom paint your car models with advice from Tim Boyd. Other Can't Miss Stories...
Kostas Georgiou returns with a post-apocalyptic diorama with pro tips for modeling concrete.
Raul Corral shows you how to improve a Meng 1/35 scale Merkava.
Jean-Jacques Labrot walks you through detailing and painting a 1/72 scale Russian self-propelled howitzer.
And Iván Loera goes all-in kitbashing and scratchbuilding an unusual M48H Patton Hybrid instead of using a kit.
Don't miss the WonderFest 2026 show gallery and an incredible One Great Model from professional figure modeler Matt Mrozek!

FINESCALE MODELER'S MOBILE APP IS HERE


SHOP ISSUES Recommended For You  

Shop Now

Shop Now

Shop Now  
Sales tax where applicable. Subscribers outside the U.S. are eligible for digital only

[Клуб Стендов Моделизъм България]

New Book — Northeastern Railroading Before the Fall from "Trains.com Store" (Sun, 20 Sep 2026 10:58:27 -0500 (CDT))

Northeastern Railroading Before the Fall — Pre-Order Now

BOOKS   ❘   GIFTS   ❘   MAGAZINES   ❘   DVDs   ❘  SALE


The 1960s and '70s were difficult years for American railroading — but nowhere more so than the Northeast. Rising commuter deficits, shrinking freight traffic, vanishing passengers, and cumbersome rate regulations left carriers across the region with nowhere to turn. And then came Penn Central: the merger that was supposed to save two great railroads, and instead became one of the most spectacular financial collapses in American business history.
In Northeastern Railroading Before the Fall, author Brian Solomon tells the full story of how the region's railroads navigated — and in many cases failed to survive — this era of crisis. Each railroad's story is its own: the mighty Pennsylvania, brought low by a disastrous merger. The Reading and other former anthracite roads, watching their core traffic evaporate. New England carriers like the Boston & Maine, fighting to hold on. Some merged. Some failed. Some were ultimately rescued only by the creation of Conrail in 1976.


Through hundreds of color photographs, Solomon captures these railroads at their most vivid — still running, still colorful, even as the ground shifted beneath them. It's a story of boardroom miscalculations and blue-collar perseverance, of an industry under siege and the railroaders who kept the trains moving regardless.
Northeastern Railroading Before the Fall arrives this October from the Trains.com Store. If you lived through this era, worked on these railroads, or have spent years studying them, this is the book you've been waiting for.
Pre-order now at the Trains.com Store and be among the first to receive your copy when it ships this October.PREORDER NOW












Get to know the Trains.com family! Explore all the best in modeling how-to, railroad news and history. Learn more today...











 
Sales tax and retail delivery fee where applicable.  •Preferences•Customer Service•Privacy Policy•View Online
This message was sent to

©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402
AS1668

[Клуб Стендов Моделизъм България]

New model kit reviews, show gallery, and more! from FineScale Modeler Newsletter (Wed, 23 Sep 2026 06:57:39 -0500 (CDT))

9/23/2026




 ☰✕Show Galleries|Kit Reviews|How-To|Magazine 

 New kit review

Kotare 1/32 scale Supermarine Spitfire Mk.Vb (Early) plastic model kit review
Don't miss any of our exclusive Workbench Reviews, including this review of the Kotare 1/32 scale Supermarine Spitfire Mk.Vb (Early). Even if you're new to aircraft modeling, you'll get an exceptional replica when you're finishedCheck it out!
And while you're there, read:
-Tamiya 1/24 scale 1981 Nissan Skyline Sedan 2000 Turbo GT-ES plastic model kit review
Get your kit fix then check out our latest gallery. 
Brought to You By: Grex Airbrush

GREX - THE MOST VERSATILE & ADAPTABLE AIRBRUSH SYSTEM
Our innovative airbrush system allows ultimate versatility, adaptability and ergonomics with just 5 CORE airbrushes. They share the same needles, nozzles, nozzle caps, and accessories. Each Grex EVOLVES to accommodate your changing needs, preferences and applications. Choosing a Grex airbrush is a long term investment and we take pride in knowing it's the airbrush you'll depend on for many years. You'll find the same reliability, high performance and quality you've come to expect from Grex. All backed by professional and friendly customer service and a 6 YEAR LIMITED WARRANTY. Get yours today!Learn More Stark Scale Model Show

Say cheese! Car modelers gather in the spring for this seminal contest
On April 18, 2026, the Stark Scale Modelers Club held its 13th annual scale model car show at Tuslaw High School in Massillon, Ohio. A judged contest, first, second, and third place in each category were decided, along with People's Choice selections. Don't miss the wide range of auto models on offer.Take a look!
If this didn't answer your modeling questions, our forum may have the answer. 
Brought to You By: The Midwest Model Shop

Your Source for 3D Printed Ship Parts
Use code FSM26 for 10% offLearn More What’s new and popular on the FSM Forum

Posts from modelers like you cover all sorts of modeling subjects
Join the most recent and popular conversations on the FSM Forum. There's plenty to talk about, including:
• AMT/Ertl 1/20 scale Clydesdale Budweiser 8-horse hitch (Yeah, that one)
• Oregon Modelers Jamboree 2026
• Keeping completed models for a long time.......or not?Click to explore
There’s plenty to learn from our forum, and the latest FSM issue, too! 

 Get the Current Issue of FSM!

In the September/October 2026 issue of FSM
FineScale Modeler is packed with expert techniques, kit reviews, and inspiring model galleries. This issue includes:Careful painting and 3D-printed parts help Ricardo Dacoba build a spectacular A-10 Thunderbolt IIBill Krause, the designer of the Star Trek USS Enterprise-G, shows you his personal star fleetAndrew Cooper has no alternative but to scratchbash a model of the single SAS "Mothership"Tips and techniques for building models with transparent bodies
Plus:HeritageCon and AMPS 2026 show galleriesOne Great Model - An M3 Stuart stripped down for field repairsWorkbench Reviews of the Tamiya M24 Chaffee, Tamiya Zakspeed Turbo Capri, MPC V.I.N.CENT, and more!
And more!Get the issue 

 Recommended for You

Shop Now

Shop Now

Shop Now  NEED ASSISTANCE?CONTACT USVISIT OUR WEBSITELIKE US ON FACEBOOKGIVE A GIFT


 |Preferences|Customer Service|Privacy Policy|View In Browser
This message was sent to .

©2026 Firecrown Media
405 Cherry Street, Chattanooga, TN 37402

[Клуб Стендов Моделизъм България]

Save $2 on Contest Cars! from FineScale Products (Mon, 28 Sep 2026 09:56:30 -0500 (CDT))

All-New: Contest Cars 2026

BOOKS  ❘  TOOLS  ❘  MAGAZINES  ❘  DOWNLOADS  ❘  SALE

ORDER YOUR COPY
FineScale Modeler proudly presents Contest Cars 2026! This 100-page special publication is packed with scale-auto show and contest coverage from NNL North, ACME Southern Nationals, the IPMS/USA National Convention, and more.
Explore 400+ awe-inspiring models – muscle cars, custom cars, lowriders, trucks, exotics, and more – from the hobby’s top modelers including detailed photos and comprehensive captions.
BONUS: Check out this all-new how-to section featuring articles written by multi-award winning and master scale modelers Tim Boyd and Mark Jones. These exclusive modeling and painting tips and tricks will help you make your models contest worthy.

ORDER YOUR COPY










Get to know the Trains.com family! Explore all the best in modeling how-to, railroad news and history. Learn more today...











 
Sales tax and retail delivery fee where applicable. Preliminary cover shown; final cover subject to